DESCRIPTION :
- Zinc stays in solution once stirred.
- Extremely easy to apply and easy to recoat.
- Single component, Apus Reacted urethane.
- Very resistant to mud cracking.
- Zinc - rich primer / top coat
- Recommended for immersion applications when top coated.
- Colour: Grey
- High solids, VOC compliant coating.
|
| |
USES:
- High performance zinc - rich primer or single protective coating in any use on steel where maximum resistance to rust or corrosion undercutting is required.
- Proven performance as primer in long life, high durability urethane systems for tanks, chemical and marine structures and bridges.
- Best possible zinc - rich coating for use in Field applications where weather limits the use of other zinc coatings.
|
| |
| TECHNICAL DATA : |
| |
| Solids by volume |
: |
62.0 + 2.0% |
| Weight / Ltr |
: |
2.44 + 0.36 Kg / Ltr |
| Pigment type |
: |
83 % zinc in Dry film |
| Flash Point |
: |
Above 40° C |
| Theoretical coverage |
: |
7 m2 / Ltr @ 75 microns |
| Recommended Dry film thickness |
: |
60 - 75 microns DFT |
| Temperature resistance (Dry ) |
: |
150° C continuous and 175° C intermittent |
| Curing time @ 25° C |
: |
Touch – 20 min; Handle - 8 hour ; Recoat - 4 hours; Stack -10 hours |
| Recoatability |
: |
Tack free ( this is achieved normally in 4 hours ) |
| Colour |
: |
Grey |
| Finish |
: |
Matt |
| Shelf life |
: |
12 Months in an unopened original container. |
| |
ADVANTAGES :
- Single component
- Can be applied in cold, damp conditions at humidities to 99%
- Can be applied at low temperature to below freezing.
- Best corrosion resistance to all zinc primers when top coated.
- Out performs inorganic zinc three coat systems.
|
| |
Aster Infotech