DESCRIPTION :
- Superior adhesion to most surfaces including old paint, tightly adherent rust and galvanized surfaces.
- Single component. Apus cured Urethane.
- Multiple use topcoat.
- Colours : Aluminium
|
| |
USES:
- Outstanding corrosion resistant topcoat over AR Zinc.
- High performance, one coat for multiple coat thin film coating or steel, aluminium, concrete and most plastics in marine or chemical environments.
- Extremely good weathering resistance.
- Outstanding one coat or multiple thin film coating for restoring weathered or corroded galvanized steel.
|
| |
| TECHNICAL DATA : |
| |
| Solids by volume |
: |
40 + 2 % |
| Weight / Ltr |
: |
1 Kg + 0.05 |
| Pigment type |
: |
Non leafing Aluminium flake. |
| Flash Point |
: |
40° C |
| Theoretical coverage |
: |
8 m2 / Ltr @50 microns |
| Recommended Dry film thickness |
: |
75 - 100 microns |
| Temperature resistance (Dry ) |
: |
150° C continuous and 175° C intermittent |
| Curing time @ 25° C |
: |
Touch - 30 min; Handle - 8 hours; Recoat - 4 hours; Stack - 23 hours. |
| Recoatability |
: |
Tack free ( this is normally in 4 hours ) |
| Colour |
: |
Silver |
| Finish |
: |
Matt |
| Shelf life |
: |
12 Months in an unopened original container, |
| |
ADVANTAGES :
- Single component -- no catalyst mixing errors.
- Can be cured at low temperatures to below freezing. Avoid frozen surfaces.
- Excellent impact resistance.
- Excellent resistance to aging, cracking, weathering and most chemicals and Hydraulic fluids.
- Typical urethane abrasion resistance and all round performance in harsh environments.
|
| |
Aster Infotech