DESCRIPTION :
- Does not weaken the adhesion of old coatings.
- Single component, Apus Reacted urethane.
- Does not tend to peel or delaminate old lead based coatings.
- Proprietary blend of corrosion inhibitor and micaceous iron oxide.
- Very resistant to thermal shock, recommended for extremely cold environments down to 60° F.
- Colour : Grey
- Designed specifically to solve the peeling and delamination problems found in epoxy mastic when used to overcoat old coatings.
|
|
USES:
- This product is designed to overcoat old coating including oil based red lead, vinyl red lead, alkyd, phenolic and most old coatings.
- Spot prime bar steel with AR-MIO Zinc.
- This product is not recommended direct to metal.
- Use to overcoat old red lead vinyl on gates and other hydro projects.
- Compatible with PUR QuilkTM Accelerator system.
|
|
TECHNICAL DATA : |
|
Solids by volume |
: |
61.0 + 2.0% |
Weight / Ltr |
: |
1.9 + 0.4 Kg / Ltr |
Pigment type |
: |
Micaceous Iron Oxide ( MIO ), 0.6 Kg / Ltr |
Flash Point |
: |
Above 40° C |
Theoretical coverage |
: |
7 m2 / Ltr @75 microns DFT. |
Recommended Dry film thickness |
: |
75 microns DFT. Avoid excessive Dry films over 150 microns, may show bubbling. |
Temperature resistance (Dry ) |
: |
145° C continuous and 175° C intermittent |
Curing time @ 25° C |
: |
Touch - 30 min; Handle - 8 hour; Recoat - 4 hours; Stack - 10 hours. |
Recoatability |
: |
Tack free ( this is normally in 4 hours) |
Colour |
: |
Grey |
Finish |
: |
Matt |
Shelf life |
: |
12 Months from date of shipment in an unopened original container. |
|
ADVANTAGES :
- Single component - no catalyst mixing errors.
- Can be applied in cold, damp conditions - humidities to 99 %.
- Can be applied at low temperatures to low freezing. Avoid frozen surfaces.
- Can be immersed within 1-2 hours.
|
|